Itty Bitty Pumpkin Treats (revisited)

I’d like to say happy fall y’all. I don’t know which part of the country (or world) you are in, but I hope you are able to enjoy some fall-like weather. Here in South Carolina it was 87 degrees today. In parts of Colorado, I heard it was snowing. What happened to fall? Did Mother Nature forget about it this year?
Well, besides the weather, fall is showing its colors and everything is apples and pumpkins. This is an old post, but I thought I’d re-share because it’s a really cute idea for a fall treat.
These little guys are “Itty Bitty Punkin’ Treats!” They may be tiny but they are pure deliciousness!
Here is what you need:
1 box powdered sugar
1 small jar peanut butter
1/2 stick of butter
red & yellow food coloring
chocolate chips
Mix powdered sugar, peanut butter and softened butter in a bowl just until combined.
 Mix red and yellow food coloring with 1/4 cup of water until you get the desired orange.
This was a good job for Little Man #2.

Add the food coloring, a little at a time, to the peanut butter mixture and mix well.
Roll the dough into small teaspoon size balls. Little Man #2 had fun helping me with this.
Use a toothpick to create criss-cross markings across the top of the balls.

Top each ball with a chocolate chip and you have your little punkins!
You can share or save them all for yourself! :)
ENJOY!
I should note that the first time I posted this recipe I had a lot of emails asking about the bake time. There is no baking!

 By the way, forgive the appearance of my blog! Not sure what happened but something removed the buttons on the sidebar and also the design of the blog. Oops! Anyway, a new design is in the works and I can’t wait to reveal!

Decorated Halloween Branches

 I kept my Halloween decorations to a minimum this year since our house is currently on the market. Did I tell y’all that, by the way? Yes, the house went on the market! Anyway, as much as I love decorating for Halloween (and fall in general), I kept it minimal for staging purposes. I hate my house being staged. It doesn’t feel like my house.

halloween branches with paper ornaments

But I did create this little vignette on my kitchen sideboard.
The weather here in SC has been gorgeous! I sent the boys into the woods in our back yard and asked them to find me some big branches. Of course this was not a difficult task for them! They love collecting sticks!

I spray painted the branches with some black spray paint I had in the garage.

During the process of turning and drying each side, I made the “ornaments.” I already had made some of these rosettes for a holiday craft party I had for the neighbors. I used Stampin Up designer series paper, punches and the Designer Rosette Bigz Cutting Die to create the accordion folded rosettes. (order rosette die here) I basically layered the different pieces using the coordinating papers from Stampin Up. (They make it so easy!)

halloween rosette howlstooth scaringbone stampin up

I used Howlstooth and Scaringbone designer series paper for these two. I LOVE this paper! It is darling for Fall and halloween, but can also be used any time of the year! You can order it here.

halloween rosette howlstooth scaringbone stampin up

  These next two are made from Stampin Up’s Wicked Fun designer series paper, which, by the way, is on clearance for an excellent deal! Order it here.stampin up wicked fun halloween rosette

This ornament also uses the Lifestyle Crafts Lattice Doily cutting die.

lifestyle craft delicate doily die cut halloween ornament

I also used this skeleton cutting die from Lifestyle Crafts Tricks ‘n Treats collection.

lifestyle crafts skeleton die cut

Once I started assembling it, I realized that it would be a great activity for the boys!

lifestyle crafts skeleton die cut

So I cut two more sets and told them to see if they could build a skeleton.

I let them do it on their own first and I was pretty surprised at how well they did! But then I let them use mine as a model to glue their pieces to the paper.

lifestyle crafts skeleton die cut

lifestyle crafts skeleton die cut

My skeleton got some ribbon and some distressing and was hung on my tree with the rosettes.

lifestyle crafts skeleton cutting die

And here are all the “ornaments” all together on the branches.

halloween branches with paper ornaments

My little corner of Halloween!

Hey, have you entered to win the Designed Beginnings store credit? You could win a $40 store credit to use on anything  you want! Don’t miss out! YOu have until Friday, October 19 to enter! Just click here.

Halloween Matchbox Treats

lifestyle crafts matchbox die cut stampin up halloween

Yes, Halloween is right around the corner! Can you believe it? It is time to start thinking about those Halloween treats!
The Lifestyle Crafts Fall Core Collection 2 cutting dies have just been released!

And I’ve used two of these items to make the cute little Halloween treat boxes above!

The Rectangular Matchbox Cutting Die was used to create the treat container. I chose some coordinating Halloween papers from Stampin’ Up! and ran them through the Big Shot with the matchbox die cut.

Here is box number 1…

lifestyle crafts rectangle match box cutting die

This designer series paper I used for this box, Wicke Fun, is one of my favorite holiday papers! And it’s on clearance right now and are 50% off the regular price!! Get it here before they are gone! I also used the bat punch, also on clearance (order here) and the new rosettes die cut (order here).

stampin up halloween rosette

Once the box is cut you fold it and put it together  so it looks like this. The rosette die cuts and scores the paper. To create the rosette, you will fold (accordion style) the scored marks, glue the two end pieces and push the center inwards and fill the center with hot glue to secure. The circles and bat are punched and the white circle is stamped with using the Wicked Fun stamp set (order here).

rectangle match box cutting die stampin up rosette

I added a stip of matching card stock around the box. Before I attached it, I stapled coordinating ribbons. Don’t worry, the staple will be covered by the rosette!

lifestyle crafts matchbox cutting die

Then I secured the rosette piece on the strip with hot glue.

stampin up rosette wicked cool halloween

Now for box number 2…

In addition to the matchbox die, I used the Lattice Doily Die, also from the new collection, for the second box.
I ran it through the Big Shot, using grey card stock.

lifestyle crafts  latticedoily cutting die

The doily was then folded to fit around the box.
This designer series paper from Stampin Up! is Howlstooth & Scaringbone, the new Halloween collection. This collection is fun! It features orange and ivory polka dots, herringbone, stripes, orange chevron (TRENDY), grey & ivory polka dots, and a few other very “in” prints (order here).

lifestyle crafts lattice doily matchbox cutting die

Like the first box, I stapled coordinating ribbon to the doily piece before attaching it to the box (order here). The rosette was created like above. Now check out the cute googlie eyes on the mummy! I actually purchased this stamp from Michaels (in the dollar stamp bins) but you can find a similar stamp set here. And the adorable googly eyes have adhesive backing (order here).

 lattice doily matchbox cutting die stampin up howlstooth

A glue dot to attach “spooky” (from the Wicket Fun set) and hot glue to attach the rosette.

stampin up howlstooth googlies

Ladies and gentlemen…
you have some adorable Halloween treat boxes!

lifestyle crafts matchbox stampin up wicked cool bats

lifestyle crafts matchbox stampin up howlstooth goolies

lifestyle crafts matchbox die cut stampin up halloween

And here is one other matchbox (not Halloween related) I created using the rectangular matchbox cutting die from Lifestyle Crafts.

lifestyle crafts rectangular matchbox cutting die Remember the Spooky Halloween Coffin I shared with you last week?

lifestyle crafts coffin die cut stampin up wicked fun stamp

The Tricks-n-Treats dies are now for sale! There are a bunch of fun Halloween die cuts to choose from so be sure to take a look!

And don’t forget, you can save 20% by entering the code SCISSORS at checkout!!

Spooky Halloween Coffin

Lifestyle Crafts will be releasing their newest line of fall holiday die cuts on September 17. I have a little sneak peak for you of one of the dies from the Tricks ‘n Treats collection.

lifestyle crafts halloween coffin die cut

This spooky coffin was created from the QuicKutz coffin cutting die {not for sale until Sept 17}. Let me show you how I made it.
I started by measuring some designer series paper from Stampin’ Up! {view entire collection here}. What I love about SU’s designer paper is that it is heavy duty, like card stock, so you can use it for boxes, cards, etc. and it will hold up. It’s not flimsy like the paper you get at the craft store. This grey and ivory polkadot paper is from their newest Halloween collection, Howlstooth and Scaringbone {order here}.

lifestyle craft coffin die cut howlstooth paper

After cutting the paper to size, I placed the paper and die in the cutting plates and ran it through the Big Shot {order here}. The die cuts some edges and perforates others.

lifestyle craft coffin die cut howlstooth paper

The perforated edges are to be folded. The small tabs are where you will glue the sides together.

lifestyle craft coffin die cut howlstooth paper

Two way glue works best for three-dimensional objects. It makes them sturdier. It comes in a green and white bottle and you can find it in the scrapbook adhesive section of the craft store or you can order here.

lifestyle craft coffin die cut howlstooth paper

Once the top and bottom were glued, they looked like this.

lifestyle craft coffin die cut howlstooth paper

Then I decided I wanted to emboss the top, so I had to peel it apart. I had this cute spiderweb embossing folder (order here) so I used it for the coffin lid.

spider web embossing folder

And then I decided I needed to distress it with some ink (are you surprised?)

spider web embossing folder coffin die cut

Now that the coffin was finished, I needed to dress it up. I used these two small tags, part of Lifestyle Crafts Label It Kits cutting dies.

lifestyle crafts label it kit die cut

Once cut, I used Stampin Up Wicked Cool stamp set {order here}. I stamped “Spooky” and then used the spider web to stamp in just the corners of the label. Then, of course, I distressed both tags with black ink.

wicked fun stampin up

I used double-sided adhesive to stick the tags together and then added a little rhinestone embellishment {order here}.

stampin up wicked fun stamp label it kit die cut

I tied two coordinating ribbons in a single knot and attached the tag to the coffin using a dimensional adhesive {order here}. If you’re not familiar with dimensionals, they are fat, double-sided adhesive pieces that leave a gap between the two pieces you are attaching. They add “dimension” to your project!

lifestyle crafts coffin die cut stampin up wicked fun stamp

And that was it!

lifestyle crafts coffin die cut halloween decor

I added some crinkled orange paper which I cut myself using a scoring board and scissors.

The skeleton came from a Dollar Tree garland.

lifestyle crafts coffin die cut stampin up wicked fun stamp

Be sure to check out Lifestyle Crafts new fall cutting dies! Tricks ‘n Treats and Cornucopia will be for sale September 17.